Planet Technology Network Device WAP-4033PE - Manual (Page 7)

Chapter 1 Introduction
Thank you for purchasing WAP-4033PE. The WAP-4033PE supports both IEEE 802.11b and IEEE
802.11g standards. You can use it to connect an existing WLAN, or to build up a new wireless LAN.
Except for essential AP mode, WAP-4033PE also provides AP Client/ Bridge/ Repeater and WDS
(Wireless Distributed System) modes to accommodate all kinds of network topology. High data rate (up to
54Mbps) support allows faster communication between LAN and WLAN. Maximize network efficiency
while minimizing your network investment and maintenance costs. With the PoE (IEEE802.3af) interface,
users can easily connect this AP to anywhere.
\
Supports WPA, WPA2, WEP and MAC address filter function to consolidate the wireless network security,
you can prevent unauthorized wireless stations from accessing your wireless network.
This product provides a friendly user interface and allows users to configuring from web browser. Without
utility install, user doesn’t need to find the utility for this product in lots of program list, it can be configured
in different OS that has provide web browser.
1.1 Package Contents
Make sure that you have the following items:
z 1 x WAP-4033PE
z 1 x Power Adapter
z 1 x User’s Manual CD
z 1 x Quick Installation Guide
z 1 x External Antenna
Note:
If any of the above items are missing, contact your supplier as soon as
possible.
1.2 System Requirements
Before installation, please check the following requirements with your equipment.
z Pentium Based (or above) IBM-Compatible PC System
z CD-ROM drive
z Windows 98/Me/NT/2000/XP/Server2003 Operating System with TCP/IP protocol
7