Planet Technology Network Device WAP-4033PE - Manual (Page 19)

AP MAC Address If you want to bridge more than two wired Ethernet networks together with wireless
connection, you have to enter the MAC addresses of otherWAP-4033PEs that with
join the bridging work into the fields.
Set Security IF you want to enable security to protect your wireless connection. Please press
“Set Security” button and refer to section “3.2.8 Security setting for bridge mode” to
configure the detail settings.
After configuration complete, please click “Apply” button to save the configuration. Then you will see
a screen to prompt you the settings are save successfully. You may press “Continue” for configure
other settings or “Apply” to restart WAP-4033PE with new configuration.
3.2.6 AP Bridge - WDS Mode
If you want an access point to bridge wired Ethernet network and provide connection service for
other wireless bridge at the same time, you have to set the WAP-4033PE to “AP Bridge - WDS”.
Simply speaking, “AP Bridge - WDS” function is the combination of “AP mode” and “AP
Bridge-Point to Multi-Point mode”.
Parameter Description
Mode Shows the current operation mode. You may set WAP-4033PE to other operating
mode by select other operating mode.
19