Planet Technology Network Device WAP-4033PE - Manual (Page 23)

Parameter Description
Encryption You can select “None”, WEP 64bits”, “WEP 128bits”, “WPA (TKIP)” or “WPA2
(AES)” of this option . In default, it is None.
Key Format This is only used when you select WEP 64bits” or “WEP 128bits” encryption
method. You may select to select ASCII Characters (alphanumeric format) or
Hexadecimal Digits (in the “A-F”, “a-f” and “0-9” range) to be the WEP Key. For
example:
ASCII Characters: guest
Hexadecimal Digits: 12345abcde
WEP Key This is only used when you select WEP 64bits” or “WEP 128bits” encryption
method. The WEP key is used to encrypt data transmitted between the bridged
access points. Fill the text box by following the rules below.
64-bit WEP: input 10-digit Hex values (in the “A-F”, “a-f” and “0-9” range) or 5-digit
ASCII character as the encryption keys.
128-bit WEP: input 26-digit Hex values (in the “A-F”, “a-f” and “0-9” range) or
10-digit ASCII characters as the encryption keys.
Pre-shared Key
Format
You may select to select Passphrase (alphanumeric format) or Hexadecimal Digits
(in the “A-F”, “a-f” and “0-9” range) to be the Pre-shared Key. For example:
Passphrase: iamguest
Hex (64 characters): 12345abcde
Pre-shared Key The Pre-shared key is used to authenticate and encrypt data transmitted between
23