Panamax M1500-UPS - Manual (Page 17)

15 USA & Canada (800) 472-5555 • (707) 283-5900 • Fax (707) 283-5901
RS232 Communications Protocol & Command Set
(continued)
Request Input Voltage Level
Transmit the input AC voltage status
Send to UPS: ?INPUTVOLTS
Response from UPS: XXXVACIN
XXX is the input AC voltage represented
in ASCII.
Request Output Voltage Status
Transmit the output voltage state
Send to UPS: ?OUTPUTSTAT
Response from UPS: XXXVACOUT
XXX is the output voltage represented
in ASCII.
If the UPS is not in AVR or BATTERY mode:
Response from UPS:
NORMAL
If the UPS is in AVR mode and boosting voltage by 13%
Response from UPS:
AVRBOOST1
If the UPS is in AVR mode and boosting voltage by 26%
Response from UPS:
AVRBOOST2
If the UPS is in AVR mode and bucking voltage by 11%
Response from UPS:
AVRBUCK1
If the UPS is in BATTERY mode
Response from UPS:
BATTERY
Request Load Level Status
Transmit the load level percentage.
Send to UPS: ?LOADSTAT
Response from UPS: XX%LOAD
XX is the load percentage represented
in ASCII.
Request Battery Charge Level Status
Transmit the remaining battery charge percentage.
Send to UPS: ?BATTERYSTAT
Response from UPS: XX%BATTERY
XX is the battery charge percentage
represented in ASCII.
Identify Equipment
Transmit the model number, firmware number and revision.
Send to UPS: ?ID
Response from UPS: PANAMAX
M1500-UPS
FWPARTNUMBER
REVREVISION
List all Commands and Queries
Send to UPS: HELP
Response from UPS: MAIN_ON
MAIN_OFF
NCL_ON
NCL_OFF
BATTHRESH
BEEPON
BEEPOFF
RESTORE
?OUTLETSTAT
?INPUTVOLTS
?OUTPUTSTAT
?LOADSTAT
?BATTERYSTAT
?ID
HELP