Panamax M1500-UPS - Manual (Page 12)

2. Event: When this option is
selected, the log will display a list
of events such as power failure,
program start, and program end.
3. Closed Application
Information:
When this option
is selected, the log will display the
names and location of any files that
were auto-saved by the software. 1. Log Display:
This window displays
the information as
selected by the Event,
Closed Application
Information, or Data
Record option buttons.
6. Cancel: Closes
the window without
saving any changes.
7. Clear: Clears the
selected log.
5. OK: Closes the
window and saves
any changes.
4. Data Record: When this
option is selected, the log will dis-
play a record of the items that are
shown in the main window.
10 USA & Canada (800) 472-5555 • (707) 283-5900 • Fax (707) 283-5901
Home Cinema Power Control Software Instructions
(continued)
Battery Features
LOG MENU
Testing The Battery Backup Function
Once you have set up your UPS system, you may wish to test it.
Make sure that the UPS has been charged for at least 4 hours
before testing.
To test the UPS, simply depress the test button located on the
front of the unit. The unit will cycle to battery and emit an audible
beep. The unit will stop beeping when the test is complete.
You may also use the self-test function in the software. To use
the software self-test, open the main window, and then click
mode on Setup. Click the red run button. The unit will cycle to
battery mode and emit an audible beep. With the software self-
test, the unit will switch back to AC power automatically.
Battery Replacement
Read and follow the IMPORTANT SAFETY INSTRUCTIONS before
servicing the battery.
Service the battery under the supervision of personnel knowl-
edgeable of batteries and their precautions. Servicing the bat-
tery can only be performed by qualified personnel.
CAUTION! Use only the specified type of battery. See your dealer
for replacement batteries.
CAUTION! The battery may present the risk of electrical shock.
Do not dispose of batteries in a fire as they may explode. Follow
all local ordinances regarding proper disposal of batteries.
CAUTION! Do not open or mutilate the batteries. Released elec-
trolyte is harmful to the skin and eyes and may be toxic
CAUTION! A battery can present a high risk of short circuit cur-
rent and electrical shock. Take the following precautions before
replacing the battery:
1. Remove all watches, rings or other metal objects.
2. Only use tools with insulated handles.
3. Do not lay tools or metal parts on top of battery or any
terminals.
4. Wear rubber gloves and boots.
5. Determine if the battery is inadvertently grounded. If inadver-
tently grounded, remove source of ground. CONTACT WITH A
GROUNDED BATTERY CAN RESULT IN ELECTRICAL SHOCK! The
likelihood of such shock will be reduced if such grounds are
removed during installation and maintenance (applicable to a
UPS and a remote battery supply not having a grounded circuit).