beautypg.com

Planet Technology FNSW-1608PS User Manual

Page 28

background image

- 28 -

Figure 4-21 Port Configuration Web Page Screen

Table 4-4 Descriptions of the Port Configuration Web Page Screen Objects

cts







Table 4-5 Descriptions of the Port Configuration Web Page Screen Obje

Object

Description

Port

Allow choosing all or one port of Web Smart PoE Switch for further management, the
available options is All & 01 to 16 (FNSW-1608PS). Or All & 01 to 18 (FGSW-1828PS).

Speed Mode

Allow choosing various speed duplex mode from one specific port of Web Smart PoE
Switch , the available options are shown as below:
Auto Negotiation
1000Full (FGSW-1828PS 1000Mbps Port Only )
100Full
100Half
10Full
10Half
Default mode is Auto Negotiation.

Flow Control

Allow to configure Flow control function of each port from Web Smart PoE Switch, the
available options are Enable and Disable. Default mode is Enable.

State

Allow disable or enable one specific port from Web Smart PoE Switch, the available options
are Enable and Disable. Default mode is Enable.

Port Description

Allow input per Port Description of Web Smart PoE Switch, up to maximum 8 characters
allow.

Apply button

Press “Apply” button for save current configuration of each port on Web Smart PoE
Switch.

Object

Description

Port

Indicate port 1 to port 16 (FNSW-1608PS), port 1 to port 18 (FGSW-1828PS).

Current Status

d Mode and Flow Control.

Display per port Current Status, such as Link, Spee

Link

status from each port of the Web Smart PoE Switch.

Display current link

Speed Mode

eb Smart PoE Switch.

Display current speed mode from each port of the W

Flow Control

urrent flow control status from each port of the Web Smart PoE Switch.

Display c


Setting Status

s, such as Speed Mode, Flow Control, State and Port

Display per port Current Setting Statu
Description.

Speed Mode

Display per port Speed Mode setting value.

Flow Control

Display per port Flow Control setting value.

State

Display per port State setting value.

Port Description

per Port Description.

Display

Refresh button

Press “Refresh” button to refresh current status.

This manual is related to the following products: