Pfaff 1246 - Manual (Page 30)

Preparation
9 - 1
9 Preparation
All regulations and instructions in this Instruction manual are to be observed!
Special attention is to be paid to all Notes on Safety!
All preparation work is only to be carried out by appropriately trained personnel.
Before all preparation work, the machine is to be switched off via the on/off
switch or to beseparated from the electricity supply by removing the plug from
the mains!
9. 01 Inserting the needle in the PFAFF 1245
Turn the machine off!
Use only system 134 - 35 needles!
● Loosen needle retaining screw 1.
● Insert the needle as far as possible (the
long needle-groove must be facing left).
● Tighten needle retaining screw 1.
The selection of the correct
needle depends on the model of
the machine and the material and
threads being sewn.
Fig. 9 - 01
1