Premier Mounts USA - Manual (Page 8)

USA
Page 8 Installation Instructions
3. Once the mounting points are aligned with the lower USA mounting bracket, place a Griplate™ over each mounting point (flat side
down) and secure them using the appropriate hardware (see Page 6).
4. At this time, tighten all hardware.
WARNING: THREE PEOPLE MUST PERFORM THE FOLLOWING STEP; TWO PEOPLE TO HOLD THE DISPLAY,
AND ONE TO TIGHTEN/LOOSEN THE SET SCREWS.
5. To adjust the overall height of the unit loosen the set screws located on the upper and lower USA arms. Tighten the set screws down
when the adjustment is complete.
USA Adjustment
The USA mounting brackets can swivel up to 15° to the left or 15° to the right by pushing or pulling the display.
CAUTION:
WHEN ADJUSTING THE USA MOUNTING BRACKETS, DO NOT APPLY ANY PRESSURE TO THE
SURFACE OF THE DISPLAY. ADJUST THE DISPLAY BY PLACING YOUR HANDS ON THE OUTER
EDGES OF THE DISPLAY.
Technical Specifications
All measurements are in inches (mm).
Griplate™ Screwdriver