Philips DCD322/12 - Manual (Page 22)

20
Program radio stations
manually
Note
You can program a maximum of 20 preset •
radio stations.
1
Tune to a radio station.
2
Press ANGLE/PROG to activate
programming.
3
Press / to allocate a number from
1 to 20 to this radio station, then press
ANGLE/PROG to conÀ rm.
The preset number and the frequency
»
of the preset station are displayed.
4
Repeat the previous steps to program
other stations.
Note
To overwrite a programmed station, store •
another station in its place.
Tune to a preset radio station
1
Press / to select a preset number
that you want.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon and the station name are displayed.
1
Tune to an RDS station.
2
Press DISPLAY/RDS repeatedly to scroll
through the following information (if
available):
Station name
»
Program type such as
»
[NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
Frequency
»
7 Listen to radio
The unit can automatically search and store
radio stations (see “Get started” > “Store radio
stations automatically”). You can also search and
store radio stations manually.
Tune to a radio station
1
Press FM .
2
Press and hold / for more than 2
seconds.
The radio tunes to a station with
»
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station, press •
/ repeatedly until you À nd optimal
reception.
Program radio stations
automatically
Note
You can program a maximum of 20 preset •
radio stations.
1
Press and hold ANGLE/PROG for
2 seconds to activate automatic
programming.
» [AUTO] (auto) is displayed brieÁ y.
All available stations are programmed
»
in the order of waveband reception
strength.
The À rst programed radio station is
»
broadcast automatically.
EN