Pioneer XW-NAS5 - Manual (Page 8)

Controls and displays 02
8
En
Chapter 2:
Controls and displays
Remote control
1  STANDBY/ON
Switches the unit between standby and on.
2 Soundscape function/operation buttons
Use to turn the Soundscape (environmental
sound) function ON/OFF, and to switch
between settings (page 19).
3 PRESET +/–, Playback control buttons
Use to select preset radio stations (page 18).
Use when operating an iPod or Bluetooth
wireless technology device with this remote
control (page 12, 16).
4 BASS/TREBLE
Use the bass and treble controls to adjust the
overall tone.
5 SLEEP
Use to put the receiver in sleep mode and
select the amount of time before sleep
(page 22).
WAKE UP
Use to turn the wake-up timer function ON/
OFF (page 22).
CLOCK
Use to switch the clock display functions
(page 21).
6 SETUP
Press to make various settings.
7 INPUT
Use to select an input source. Press repeatedly
to switch between iPod, tuner, Bluetooth
ADAPTER
1
and external input.
8 VOLUME +/–
Use to set the listening volume.
9 ENTER
10 TUNE +/–
Use to find radio frequencies (page 18).
TUNER PRESET
Use to store preset ratio stations in
memory, and to call them from memory
(page 18).
STANDBY/ON
INPUT
VOLUME
SOUND
SCAPE
SELECT
PRESET
MIX BALANCE
ON/
OFF
PRESET
ENTER
SLEEP
CLOCK SETUP
WAKE
UP
TUNER
PRESET
BASS/
TREBLE
TUNE
TUNE
1
2
3
4
5
6
7
8
9
10
Note
1 When the Bluetooth ADAPTER is not plugged in the ADAPTER PORT, cannot be selected even if INPUT is pressed.
XW-NAS5_CUXJ.book 8 ページ ２０１０年１月２６日 火曜日 午後５時０分