Palm TreoTM - Manual (Page 5)

Treo ™ Wireless Headset 5
Turning your headset on and off
Pairing with other Bluetooth phones
0
If pairing is successful, the blue indicator light flashes 10 times rapidly before
going back to flashing every 3 seconds. If pairing is unsuccessful, the light
remains solid, and you’ll need to reattempt pairing using the correct procedure
above.
Turning your headset on and off
To turn your headset on and off, press and hold the multifunction button for
3 to 5 seconds, until you see a burst of four flashes on the blue indicator light. A
series of two tones indicates that the headset has turned on or off.
1
Make sure the headset is turned off.
2
Press and hold the multifunction button for approximately 8
seconds, until you see a solid blue light.
3
Set your Bluetooth phone to discover the headset by following your
phone’s instruction guide. Typically, the steps involve going to a Setup,
Connect, or Bluetooth menu on your phone and then selecting the
option to discover a Bluetooth device.
4
When your phone finds the “Treo Headset,” it asks if you want to pair
with it. Confirm this by selecting Yes or OK.
5
When your phone asks for a passkey, enter 0000 from your keypad,
and then press Yes or OK.
Paloma_UG.book Page 5 Wednesday, December 22, 2004 11:14 AM