Panasonic KX-FP250 - Manual (Page 33)

33
T
e
le
p
h
o
n
e
The unit will automatically set the dialing mode to “TONE” or “PULSE” when the unit is turned on if this feature
is set to “AUTO”.
If you cannot dial, change the dialing mode setting to “TONE” or “PULSE” by following the instructions below.
START/COPY/SET
Dial keypad MENU
/
1 Press .
Display:
2 Press , then .
3 Press .
4 Press or to select the desired setting.
5 Press .
6 Press . MENU
SETUP ITEM [ ]
START/COPY/SET
MODE=AUTO ▼ ▲
START/COPY/SET
DIALING MODE
1 3
1.SYSTEM SET UP
MENU
Dialing mode
(touch tone or pulse)
Note:
● If you change to a different telephone company and
this company has a different dialing mode service,
reset your dialing mode.
Making and Answering Calls