Installation instructions (head expander), Cleaning instructions – Pella Avinyl Windows and Doors V784840 User Manual
Page 6

INSTALLATION INSTRUCTIONS (HEAD EXPANDER)
A. Make a pencil mark
window on the room side edge of each jamb.
B. Install the head expander on the top of the
window frame.
the head as far as it will go.
Note: To determine if the Head Expander is required refer to Step 4B.
*OUFSJPSGSBNFFEHF
)FBEFYQBOEFS
5PQXJOEPXGSBNF
4JEF7JFX
C. Test fit the window into the opening.
3LIDE
D. Drill two 1/16" pilot holes
HOLES
*OUFSJPSGSBNFFEHF
1FODJMNBSL
)FBEFYQBOEFS
CLEANING INSTRUCTIONS
2EMOVE
®
or Soft scrub
®
may be used. Do
NOT
E. Proceed to Step 4D.