Pella Avinyl Windows and Doors V784840 - Manual (Page 4)

*OUFSJPS
{
E. Apply a 1/4 to 3/8 continuous bead of sealant to the
INTERIOR
F. Place a bead of sealant
EXISTING
*OUFSJPS
{
'
in the opening by setting the bottom of the window
in first, then tilting the top into place. Make sure the
window rests against the interior surface of the blind
STOPS
(
TOP
*OUFSJPS
4IJN
TDSFX
{
I. Continue placing shims at each pre-drilled installation
screw holes in jambs as needed to plumb and square the
window. Check window for squareness by making sure
diagonal measurement from corner to corner is within
*OUFSJPS
{
J Pre-drill 1/16" diameter holes in the shims.
X
Note: Ensure the jamb adjustment screws are flush
or just below flush with the sash track so they do not
interfere with the travel of the balances.