Resetting the system, Setting the key lock, Using the language code list – Pioneer HTZ272DVD User Manual
Page 47: Additional information 10
Additional information
10
47
En
Engli
sh
Françai
s
Deut
sch
Nederland
s
Italiano
E
spañol
Resetting the system
Use the front panel controls to reset all system
settings to the factory default.
•
With the system on, press
STANDBY/
ON while holding down
USB.
The next time you switch on, all the system
settings should be reset.
Setting the Key Lock
You can disable the front panel buttons by
switching the Key Lock feature on.
1
With the system in standby, press
SHIFT+SETUP and use
/ to choose
KEYLOCK then press ENTER.
This is shown in the front panel display.
2
Use
/ to select LOCK ON or LOCK OFF
then press ENTER.
Using the language code list
Some of the language options (see Language
settings on page 30) allow you to set your
preferred language from any of the 136
languages in the Language code list below.
1
Select ‘Other Language’.
2
Use
/ to select either a code letter or
a code number.
3
Use
/ to select a code letter or a code
number.
See the Language code list below for a
complete list of languages and codes.
HTZ170_171_270_272_En.book 47 ページ ２００８年２月２８日 木曜日 午後１時２４分