beautypg.com

Setting the channel levels, Using the on-screen displays, Playing discs – Pioneer HTZ272DVD User Manual

Page 11: Getting started 02

background image

Getting started

02

11

En

English

Français

Deutsch

Nederlands

Italiano

Español

Setting the channel levels

Set the relative channel levels from your main

listening position.

1

1

Press SHIFT+TEST TONE.

The test tone is output in the following order
(from the speakers active in the current
listening mode):

L – Front left speaker

C – Center speaker

R – Front right speaker

SR – Right surround speaker

SL – Left surround speaker

SW – Subwoofer

2

2

Use the VOLUME +/– button to adjust

the volume to an appropriate level.

3

Use

/ to adjust the speaker levels in

turn.
You should hear the test tone at the same
volume from each speaker when seated in the
main listening position. The channel level
range is ±10 dB.

4

When you’re done, press ENTER to exit

test tone setup.

Using the on-screen displays

For ease of use, this system makes extensive
use of graphical on-screen displays (OSDs).

All the screens are navigated in basically the
same way, using

, , ,  to change the

highlighted item and pressing

ENTER to select

it.

3

Important

• Throughout this manual, ‘Select’ means

use the cursor buttons to highlight an item
on-screen, then press

ENTER.

Tip

• The button guide at the bottom of every

OSD screen shows you which buttons
you’ll need to use for that screen.

Playing discs

The basic playback controls for playing DVD,
CD, Video CD/Super VCD, DivX video/WMV
and WMA/MP3/MPEG-4 AAC discs are
covered here. Further functions are detailed in
chapter 4.

1

If the player isn’t already on, switch it on.

If you’re playing a disc with video, also turn on
your TV and make sure that it is set to the
correct video input.

Note

1 • This is only available when

DVD/CD is selected and playback is stopped. Also make sure headphones are unplugged.

• To adjust the overall balance while listening to any sound source you want, press

SHIFT+SETUP, use

/ to select

CH LEVEL then press ENTER. Use

/ to switch between channels, and / to adjust the channel levels. Press ENTER

when you’re finished.
2 Since the subwoofer produces ultra-low frequencies its sound may seem quieter than it actually is.
3 The screen saver will appear after five minutes of inactivity.

Button

What it does

HOME
MENU

Displays/exits the on-screen display

 Changes the highlighted menu item

ENTER

Selects the highlighted menu item

RETURN

Returns to the main menu without
saving changes

HTZ170_171_270_272_En.book 11 ページ 2008年2月28日 木曜日 午後1時24分

This manual is related to the following products: