beautypg.com

Using the extra power mode, Listening in stereo, Listening with headphones – Pioneer HTZ272DVD User Manual

Page 16: Adjusting the bass and treble, Using the sfc modes, Boosting the bass level, Listening to your system 03

background image

Listening to your system

03

16

En

Using the Extra Power mode

The Extra Power mode uses the Front surround
setup as described in Home theater sound
setup
on page 10, but the surround speakers
and center speakers should be pointed in the
same direction as the front speakers (towards
the listening position).

1

Illustration shows HTZ171DVD model:

Listening in stereo

You can listen to any source — stereo or
multichannel — in stereo. When playing a
multichannel source, all channels are
downmixed to the front left/right speakers and
the subwoofer.

Press SURROUND repeatedly until

STEREO shows in the display.

Listening with headphones

When headphones are connected, only the

STEREO mode is available.

2

Adjusting the bass and treble

Use the bass and treble controls to adjust the
overall tone.

1

Press SOUND.

2

Use

/ to select BASS or TREBLE then

press ENTER.

3

Use

/ to adjust the sound then press

ENTER to confirm.

Using the SFC modes

The SFC (Sound Field Control) modes can be
used with any multichannel or stereo source
for a variety of additional surround sound
effects.

1

Press SOUND.

2

Use

/ to select SFC MODE then press

ENTER.

3

Press

/ then ENTER to select an SFC

Sound mode.
Select between

OFF, LIVE, HALL, POP, ROCK,

DRAMA or ACTION.

Boosting the bass level

There are two bass modes you can use to
enhance the bass in a source.

1

Press SOUND.

2

Use

/ to select BASSMODE then press

ENTER.

3

Use

/ to adjust the sound then press

ENTER to confirm.
Select between

OFF, MUSIC or CINEMA.

Note

1 • When the Extra Power mode is on, most sound features cannot be used. The display will briefly blink

EXTRAPWR if you try

to use a prohibited function while the Extra Power mode is on.

• Note that you cannot use Extra Power mode when using headphones. If you press

FRT. SURR/EXT PWR when headphones

are connected, a

CANNOT error message appears on the front panel display.

• When the Extra Power mode is on, make sure to follow the Setup Guide for best sound.
• When the Extra Power mode is off, the listening mode is automatically set to

AUTO.

2 When you disconnect the headphones, the system reverts to the previous surround setting mode.

Center

Center

Front

left

Listening position

Listening position

Front
right

Subwoofer

Surround

left

Surround
right

HTZ170_171_270_272_En.book 16 ページ 2008年2月28日 木曜日 午後1時24分

This manual is related to the following products: