Connecting external antennas, Connecting auxiliary audio components, Other connections – Pioneer HTZ272DVD User Manual
Page 34: Other connections 09, Chapter 9
Other connections
09
34
En
Chapter 9
Other connections
Connecting external antennas
For an external AM antenna, use 5 m to 6 m of
vinyl-insulated wire and set up either indoors or
outdoors. Leave the loop antenna connected.
Only use the included AM loop antenna.
For an external FM antenna, use a PAL
connector to hook up an external FM antenna.
Connecting auxiliary audio
components
Using the stereo analog inputs, you can
connect an external component such as a tape
deck or MD player for playback through this
system.
•
Connect the AUDIO IN jacks to the analog
outputs of an external playback component.
Connect using RCA pin-plug stereo cables.
Outdoor antenna
5 m to 6 m
Indoor
antenna
(vinyl-coated
wire)
AM LOOP
A
N
T
E
N
N
A
PAL connector
AUDIO
R
L
LINE IN
AC IN
SURROUND
SUB
WOOFER
FRONT
CENTER
SPEAKERS (4
Ω)
R
L
R
L
To audio
output
Tape deck, etc.
HTZ170_171_270_272_En.book 34 ページ ２００８年２月２８日 木曜日 午後１時２４分