Wan cable‘s 68-pin scsi connector, Rj-45 plug, Rj-45 plug pin-out – Patton electronic 2616RC User Manual
Page 25: Figure 10
Cable installation
25
Model 2616RC T-DAC User Manual
2 • Hardware installation
Figure 10. WAN cable‘s 68-pin SCSI connector
1. Connect the 68-pin SCSI connector (see
) of the 6-foot WAN cable (see
the connector on the rear panel of the Model 2616RC.
2. Connect the WAN cable RJ-45 connectors (see
) to the corresponding ports on a patch panel or
local T1/E1 device.
Figure 11. RJ-45 plug
Table 4. RJ-45 plug pin-out
Description
Pin
Transmit pair (TX)
1
Transmit pair (TX)
2
Receive pair (RX)
4
Receive pair (RX)
5