Panasonic DIGA DMR-EA38V - Manual (Page 11)

11
RQT9058
Tips
To return to the previous screen
Press [RETURN].
Please choose settings based on your
Set Top Box.
OK
STB (Set Top Box) IR Settings
ABC
3 Digit
Brand Name
Cable Box/DVR STB (Set Top Box) Type
Max. CH digits
Off OK Key Operatin
Test
STB (Set Top Box) IR Settings:
,  to select an item,
then
OK
STB (Set Top Box) Type
– Select the service being used.
Brand Name
– Select the set top box brand.
You can also use [ ] or [] to view other pages.
Max. CH digits
– Select the maximum number of channel digits to be entered in
your set top box. This must not be selected when “Converter
Box” is selected for “STB (Set Top Box) Type”.
OK Key Operation
– Select whether or not the selected channel is confi rmed by
pressing OK in accordance with your set top box.
,  to select “Test”, then OK
– Confi rmation screen appears.
OK
Start Set Top Box Control testing.
Please input the channel number
for testing. Use either numbered
buttons or UP/DOWN Cursors.
OK
STB (Set Top Box) IR Settings
Channel :
STB Type : Cable Box/DVR
Brand Name : Panasonic
Max. CH digits : 4 Digit
OK Key Operation : On
1 0
IR Code : OO
Number
0 --
The correct operation of the Set Top Box
Control cable is checked. Enter a channel
that can be received by your set top box.
, to select a position in
which the channel is entered
and
,  to set the number,
then
OK
– You can also use numbered buttons.
Completed testing the / IR codes.
Has the STB channel changed the number you
selected? Please select from the following:
Note : “Yes, try other channels” is
recommended to try several channels.
OK
STB (Set Top Box) IR Settings
Yes, complete setup
Yes, try other channels
No, try another code
IR Code : OO
Confi rmation screen appears.
,  to select the item,
then
OK
Yes, try other channels
– Even if this unit can select a channel
on the set top box, it is recommended to select “Yes, try other
channels” and verify whether or not other channels can be
selected and properly controlled. (
Step 8)
Yes, complete setup
– Exits the Set Top Box Control setting screen.
No, try another code
Completed testing all of the % codes.
Do you want to start over the test again?
OK
STB (Set Top Box) IR Settings
No, exit
Yes, start over again
– Select this option when there are channels that
cannot be selected.
If channels cannot be selected as set,
then “Yes, start over again” or “No, exit”
will be displayed.
“Yes, start over again” : Returns to Step 6.
Set the channels again.
“No, exit” : The set top box is not controlled with this unit.
If any channel cannot be selected, then this unit cannot properly
control the set top box.
Getting Star
ted