Panasonic DIGA DMR-EA38V - Manual (Page 10)

10
RQT9058
Setting the Set Top Box Control and Clock
POWER
DVD/VHS
to turn the unit on.
“HELLO” appears on the unit’s display.
When this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 3 via an HDMI cable ( 9), it
acquires the setting information from the TV.
When the Quick Start Setting screen appears (
below,
Step 4)
Select Language
Seleccione el idioma
Sélection de langue
Press OK
Pulse OK
Appuyer sur OK
English
Français
Español
Language:
,  to select, then
OK
When the Quick Start Setting screen
appears after this step ( below, Step 4)
Select TV type and press OK.
(Please refer to Operation Instruction
for details)
Aspect Ratio Selection
4:3 TV
16:9 Widescreen TV
TV Aspect Ratio:
,  to select “4:3 TV” or “16:9
Widescreen TV”, then
OK
 When connecting to a 4:3 standard aspect TV:
Select “4:3 TV”.
 When connecting to a 16:9 widescreen TV:
Select “16:9 Widescreen TV”.
The unit can be turned on faster, in about
1 second. Please note that Quick Start
mode slightly increases power
consumption when the unit is off.
(See Operation Instructions for details)
Turn Quick Start on ?
On
Off
Quick Start Setting
Quick Start Function:
,  to select “On” or “Off”,
then
OK
This unit can control your STB
(Set Top Box ) , when connected to IN1
input using the Set Top Box Control cable.
Start setup now?
Yes
No
STB (Set Top Box) IR Settings
Set Top Box Control Settings:
,  to select “Yes”,
then
OK
 If you do not control your set top box with this unit:
Select “No”.
The unit then displays “Set Clock Manually” screen (
12, Step
10).
Tips
 “Quick Start” function ( 53)
If you set Quick Start to on, you
can start recording to DVD-RAM
about 1 second after you press
[
 DVD/VHS POWER] to turn the
unit on and then sequentially press
[
 REC].
The following happens when you have
selected “On”.
– Power consumption in standby mode
increases because power is supplied
to the unit.
To view programs from the set top
box.
 If the TV is not directly connected to
the set top box, then turn on this unit
in the following cases:
–“Quick Start” is “Off”
– “Quick Start” is “On” with this unit
being connected to the TV via a
component or HDMI cable.
 To zoom in on video
1. Press [SUB MENU].
2. Press [
,] to select “Zoom In”,
then press [OK].
To return to the previous screen
Press [RETURN].
Preparation:
 Turn on the television and select the appropriate
video input to suit the connections to the unit
(example: AV input, etc.).
 When using the set top box, make sure it is turned
on.
 These are the first settings you make upon buying
the unit. You don’t need to make these settings again.
POWER
POWER
SLOW/SEARCH
SCHEDULE
OK
FU
NC
TIO
NS
TV/VIDEO
PAUSE STOP
3 2 1
6 5 4
9 8 7
0
RETURN SUB MENU
CM SKIP
DI
RE
CT
NA
VA IG
ATAA
OR
DISPLAY AUDIO
DRIVE
SELECT
CHAPTER
CREATE
INPUT SELECT
CANCEL
DELETE
CH
CH
PLAY
VOL
A B
DVD/VHS
SETUP
TRACKING/V-LOCK
SKIP/INDEX REW FF
TIME SLIP/ JET REW
RESET