Planar LC640.480.33-AC - Manual (Page 9)

LC640.480.33-AC Operations Manual (OM600-01) 7
Optical Characteristics
Table 4. Optical Characteristics.
Luminance
Typical
Minimum 1000 NITs at screen center, initial
900 NITs at screen center, initial
Contrast Ratio
Dark room ambient
500 Lux ambient
3K Lux ambient
100K Lux ambient 200: 1 typical, 150:1 minimum
150:1 typical
50:1 typical
3:1 typical
Color Coordinates
White field x = .339 typical
y = .353 typical
Luminance Non-uniformity
31% maximum With a white screen, max difference between any 2 of 5
points is defined as follows:
Lnu(%) = (1- (Lmin/Lmax)) x 100%
Luminance Control (typical)
Dimming range 50:1 initial, 100:1 stabilized (Lmax after > 15 minutes
at max. lum., then Lmin at min. lum; dimming range =
Lmax/Lmin)
Ambient Light Sensor
Response
Field of view
Dynamic range Visible light filtered ~420 to 675nm @ 50% pts.
±50 degrees typical to half sensitivity
0 to 3000 Lux typ.; assumes 18% scene reflectance
Viewing Angle
Horizontal
Vertical ±70 degrees typ., White/black CR
≥
5
+40/-60 degrees typ., White/black CR
≥
5
(See Figure 10)
Safety and EMI
The display will not inhibit the end product from compliance with UL1950, CSA22.2,
and IEC950.The display will not inhibit the end product from complying with FCC Part
15, Subpart J, Class B or EN55022 Class B when housed in a suitable enclosure.
Reliability and Backlight Life
The demonstrated system MTBF is to be greater than 30,000 hours with a 90%
confidence level at 25 °C. Refer to the following table for backlight life.
Table 5. Backlight Life.
Usage Backlight life (typical to 50% of initial luminance)
Continuous at full luminance 20K hours
Continuous at half luminance 100K hours
Typical use using ABC* 35K hours
* Automatic brightness control