beautypg.com

Standby mode, Check the signal strength – Philips MT3120 User Manual

Page 11

background image

9

EN

Indicates the battery level (from

full to low).

When the handset is charging,

the bars keep scrolling until the

battery is fully charged or you

unplug the adapter from the

phone.
The empty battery icon flashes.

The battery is low and needs

recharging.

If you are on the phone, you hear warning

tones when the battery is almost empty. You

can plug in the charger to continue the call. The

phone turns off after approximately 15 minutes

when the battery is completely empty.

Standby mode

Your phone is in standby mode when it is idle.

In standby mode, the phone's charge lasts

about a week. If the auto lock has been set, you

see a key icon on the idle screen. You need to

press the icon to activate the phone. The auto

lock feature is automatically disabled during an

incoming call.

Check the signal strength

Indicates the link status between

the handset and base station. The

more bars are shown, the better

the connection is.

• Make sure the handset is registered to the

base station before you make or receive

calls.

• If you hear warning tones when you are

on the phone, the handset is almost out

of battery or the handset is out of range.

Charge the battery or move the handset

nearer to the base station.