Philips MT3120 - Manual (Page 10)

8 EN
Note
• You can find the passcodes/PIN in the manual of your
original cordless phone with base (unless you changed
the standard PIN code).
•
This phone is only able to connect to a base station
with the correct passcodes/PIN.
• If the passcodes/PIN is incorrect or no base is found
within a certain period, your handset displays a
notification message. Repeat the above procedure if
registration fails.
Set the date and time
Tip
• To set the date and time later, tap to skip this setting.
Your phone automatically asks you to set date
& time when you turn it on the first time. If you
need to change the date and time, refer to the
steps below.
Set the date
1
Tap to access the main menu screen.
2
Select > [Phone] > [Date & time] >
[Set date], then tap to confirm.
3
Tap / once or several times to enter
the date, then tap to confirm.
Set the time
1
Tap to access the main menu screen.
2
Select > [Phone] > [Date & time] >
[Set time], then tap to confirm.
3
Tap / once or several times to enter
the date, then tap to confirm.
Set the date format
1
Tap to access the main menu screen.
2
Select > [Phone] > [Date & time] >
[Date format], then tap to confirm.
3
Tap to select a date format, then tap to
confirm.
Set the time format
1
Tap to access the main menu screen.
2
Select > [Phone] > [Date & time] >
[Time format], then tap to confirm.
3
Tap to select a time format, then tap to
confirm.
Charge the phone
Plug the charging adapter into the headset/
charging jack at the bottom of the phone.
» The handset starts charging.
Note
•
Make sure that you switch on the phone for charging, it
only charges when switched on.
• Before first use, charge the battery until the display
indicator shows a full charge.
• The phone might get warm while the batteries are
charging. This is normal.
• If your phone's battery has depleted completely after
long periods of non-use, it may take up to 20 minutes
for the phone to recharge until it powers up.
Your phone is now ready to use.
Check the battery level
The battery icon displays the current battery
level.