Pioneer dvr-rt500 - Manual (Page 61)

Recording 06
61
En
8 : 00 11 : 00 9 : 00 10 : 00
Program 1
Prog.1
Deleted Parts
Non Recorded Portion Parts
Prog.2 Prog.3
Program 2
Program 3
Recording
Control Settings
10 Press or to select “REC MODE” and press
ENTER.
The recording modes for the media selected in “REC
TO” item are listed.
Select the recording mode and press
ENTER.
For the recording modes in VCR, see page 48, and for
the recording modes in DVD, see page 52.
ENTER/
SELECT RETURN BACK END
SELECT
SETUP ENTER
TIMER REC SET
REC REC
TO MODE TYPE
DATE (MM/DD)
START
END
CH
REC TO
REC MODE
ONCE
12
DVD
LP
OK
11/20(TH)
08:00PM
09:30PM
SETUP MENU
11 Select “OK” and press ENTER.
The timer program is determined and the TIMER REC
SET screen appears again.
12 When you enter the other program for the
timer recording, repeat the steps 3 to 11.
13 Press SETUP.
The TIMER REC SET screen disappears and the display
will return to the normal screen.
14 Press TIMER REC. The timer indicator “ ” will
appear on the display and the unit stands by for
recording.
• If the program is DVD recording only, the unit will
change to VCR mode automatically. (The DVD
mode cannot be selected.)
• If the program is VCR recording only, the unit will
change to DVD mode automatically. (The VCR
mode cannot be selected.)
• If the programs are DVD and VCR recording, the
unit will turn off. If you want to use the unit, press
TIMER REC again to deactivate the timer.
Checking or changing the timer recording
When you want to check the selected timer recording,
follow the steps
1 and 2 of “Setting timer recording” and
display the TIMER REC SET screen.
To change the timer recording, select the program to be
changed and press
ENTER. The changing method is the
same as that for the recording a program for the first
time.
Cancelling the timer recording
Display the TIMER REC SET screen.
Select the program you want to cancel and press
CLEAR/CANCEL, then the selected program will be
erased from the timer recording list.
In case timer programs-overlap
Do not overlap timer programs as portions of the
conflicting programs will be lost. The first recording
time has priority over the next recording time as shown
in the diagram below.
In this case, the next recording time is delayed a
maximum of about 1 minute.
Note
• Recording starts a few seconds before the preset
starting time.
• You cannot use the timer recording for the both
DVD and VCR at the same time.
• You can playback the DVD during the VCR timer
recording, and you can playback the VCR during
the DVD timer recording.
• If a recordable tape is not inserted or no disc space
is available, the timer record indicator “ ” flashes.
Replace the tape or disc to allow recording.
2D30901B_En_52_62 27/9/04, 17:53 61