Pioneer dvr-rt500 - Manual (Page 28)

Getting started 04
28
En
UNDO FINALIZE
You can cancel the finalization of a finalized DVD-RW (in
VR mode).
You cannot cancel the finalization for discs other than
above. You can record or edit on a disc whose finaliza-
tion has been cancelled.
Select “UNDO FINALIZE”, and the screen below will
appear.
UNDO FINALIZE
START CANCEL
• When you select “START” and press ENTER, the
cancelling finalization will start. The screen below
will appear.
UNFINALIZING
PLEASE WAIT
• When you select “CANCEL” and press ENTER, the
DISC SETUP screen will appear.
Note
• During the cancelling finalization the cursor will
move repeatedly.
• The cancelling finalization process may require a
few minutes to about 1 hour according to disc type
or the amount of free space on the disc.
• When the disc’s finalization cannot be cancelled,
you cannot select “UNDO FINALIZE”.
You can turn the display window and screen
display “ON” or “OFF”.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select “
OTHER” from “SYSTEM SETUP”. For the
procedure, see steps 1 to 3 in “Using the SETUP
MENU” on page 23.
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CH SETUP
OTHER
LANGUAGE
PARENTAL
CLOCK
DISC SETUP
OTHER
SETUP MENU
ENTER/
SELECT RETURN SETUP ENTER BACK END
SELECT
OTHER
DIMMER
DISPLAY/CALL
AUTOMATIC
ON
FINALIZE
To play a DVD disc recorded on this unit you must
finalize the disc to insure compatibility with other DVD
players. In addition if you are using a DVD-RW disc you
must record in Video mode.
When “FINALIZE” is selected, the screen below will
appear.
FINALIZE
START CANCEL
• When you select “START” and press ENTER, final-
ization will start. The screen below will appear.
FINALIZING
PLEASE WAIT
• When you select “CANCEL” and press ENTER, the
DISC SETUP screen will appear.
Note
• During the finalization the cursor will move
repeatedly. When the finalization finished, “DISC
FINALIZED” will appear.
• The finalization process may require a few minutes
to about 1 hour according to disc type or the
amount of free space on the disc.
• You can record or edit a finalized DVD-RW (in VR
mode) by cancelling the finalizing, but you cannot
do these operations with a DVD-RW (Video mode),
or with a DVD-R.
• For a DVD-RW (in VR mode) which was finalized by
another unit, you can record or edit on this unit by
cancelling the finalization.
• You cannot playback a disc recorded on VR mode
on a unit that does not support DVD-RW.
• Even if you finalize a disc in the Video mode, the
disc cannot be played back in some DVD players.
• A DVD-R disc cannot be named after it is finalized.
PROTECT DISC
You can protect a disc to prevent the content recorded
on it from being erased, edited or re-recorded.
Only DVD-RW (in VR mode) can be protected.
Select “PROTECT DISC” and select “ON” to protect the
disc.
To cancel the disc protection, select “OFF”.
2D30901B_En_22_32 27/9/04, 18:12 28