Pitco Frialator PG14D - Manual (Page 7)

L80-045 Rev0 (11/07) 7
7. Apply Teflon tape to the rear fitting of the supply piping. Install the
check valve (PP10726) onto the rear fitting of the supply piping with the
support bracket (A1826101-C) between the valve and fitting.
8. Install the supply piping assembly from the front. The assembly should
contain the piping, two fittings, check valve, and mounting bracket.
Mount the bracket to the bottom rear cabinet brace using the two Phillips
head screws (PP10694) and two of the six kep nuts (P0092300). When
mounted, reinstall the rear cabinet cover using the original screws.