Promise Technology VTrak copy VTM210 - Manual (Page 21)

Step 7: Setting the IP Address
21
===========================================
CId Port Type
IP Mask Gateway Link
===========================================
1 1
Mgmt 192.168.10.87 255.255.255.0 192.168.10.1 Up
1 1 iSCSI 192.168.10.88 255.255.255.0 192.168.10.1 Up
1 2 iSCSI 10.0.10.2 255.0.0.0 0.0.0.0 Down
6. Repeat steps 3 and 4 to set the other iSCSI port. Use -p 2 in place of -p 1.
To see the full set of CLI commands, at the admin@cli> prompt, type help and
press Enter.
This completes the Management and iSCSI Port setup. Go to “Step 8: Creating
Disk Arrays with WebPAM PROe” on page 24.