Promise Technology VTrak copy VTM210 - Manual (Page 15)

Step 5: Making Serial Cable Connections
15
Step 5: Making Serial Cable Connections
The RS-232 Serial connection enables the Command Line Interface (CLI) and
Command Line Utility (CLU) on your PC to monitor and control VTrak.
Figure 16.Serial connector for VTrak M310i. The M610i and M210i are
similar
To set up a serial cable connection:
1.
Attach a null-modem cable to the DB-9 connector on the VTrak.
2. Attach the other end of the null-modem cable to a serial port on the Host PC
or Server.
You will establish a serial connection on the Host PC or Server (see page 18). At
this time, continue with “Step 6: Connecting the Power” on page 16.
O
I
O
I
Mgmt IOIOI iSCSI 2 iSCSI 1
Mgmt
IOIOI
iSCSI 2
DB-9 Serial
Connector