beautypg.com

Stereo input channel controls – PYLE Audio PYD1270 User Manual

Page 9

background image

Pyle Pro Mixer PYD6070/1270 Owner’s Manual – 7

Stereo Input Channel Controls

CH3/4 & CH5/6 For PYD6070

CH5/6, CH7/8, CH9/10
& CH11/12 For PYD1270

LINE, LEFT & RIGHT

Each stereo input channel comes with two balanced

1/4" (TRS) line level input jacks. The unbalanced

devices can also be connected to this input. If

only the jack marked "LEFT" is used, the channel

operate in mono. The stereo channels are designed

to handle typical line level signals.

EQ (PYD6070)

It is similar to those of the mono channels, except

that the EQ is stereo. It is preferable of using two

mono equalizer when EQ-ing a stereo signal to

avoid the discrepancies occurred oftenly between

left and right setting.

EFX

It is similar to those of the mono channels, except

that the EFX SEND buses are both mono, a mono

sum is first taken from the stereo input before

it is sent to the EFX bus.

BAL

It determines the level of left and right input

signals relative to each other before both signals

are then routed to the MAIN stereo mix bus,

allows you to balance the source in the stereo

image. If a stereo channel is run in mono (only

the left input connected), the balance control acts

as a pan in the normal way.

LEVEL

It determines the level of channel signal in the

MAIN mix bus and provides a clear visual indication

of channel level.

GAIN (PYD1270)

It is an input sensitivity switch which used to

select between +12dB (press on) for studio level

and 0dB (press off) for home-recording level.

This manual is related to the following products: