Polaris Hawkeye 4x4 - Manual (Page 94)

1
91
MAINTENANCE AND LUBRICATION
Spark Plugs
Spark Plug Removal and Replacement
1. Remove the left side panel.
See page 86.
2. Remove the spark plug cap.
3. Using the special wrench
provided in the tool pouch,
rotate the spark plug (1)
counterclockwise to
remove.
4. Inspect the electrodes for wear and
carbon buildup. Replace worn or
fouled plugs. Verify that the gap is at
specification before installation.
NOTE: Refer to the specifications
section beginning on page 116 for
the recommended spark plug
type and gap.
5. Reverse the procedure for spark plug installation, using the
recommended spark plug.
6. Torque to 12 ft. lbs. (16 Nm).