Polaris Hawkeye 4x4 - Manual (Page 43)

40
FEATURES
Instrument Cluster
The instrument cluster measures
distance in miles or kilometers
as well as hours of operation.
It also includes a reverse speed
limiter function that limits the
ATV’s speed to approximately
7-9 mph. Refer to page 31
for additional information.
CAUTION
To prevent damage, wash the ATV by hand or with a garden hose
using mild soap. Do not use alcohol to clean the instrument
cluster. Immediately clean off any gasoline that splashes on the
instrument cluster. Do not allow insect sprays to come into
contact with the lens.
Miles/Kilometers Toggle
The display in the tripmeter, odometer and speedometer can be
changed to display either kilometers or miles.
1. To change modes, press and release the mode button (see page 31)
as often as needed to reach the odometer mode.
2. In the odometer mode, press and hold the mode button until the
letters flash, then release the button.
3. Press and release the button one more time. When the display
stops flashing, the mode has been set.