Panasonic DMR-EH67 EN - Manual (Page 26)

26
RQT8906
Timer recording
See also “Important notes for recording” ( ➡ 8).
Depending on the type of disc used for recording or the type of
broadcast, there may be restrictions on the title you are trying to
record.
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
≥You can enter up to 32 programmes up to a month in advance.
(Each daily or weekly programme is counted as one programme.)
[RAM] [-RW‹V›] [+R] [+R]DL] [+RW]
≥To use a new disc, formatting is necessary.
Preparation
≥Turn on the television and select the appropriate video input to suit
the connections to this unit.
≥If recording to DVD, insert a disc that you can use for recording
( ➡ 22).
≥Make sure that the clock settings are correct ( ➡ 67).
[For]Australia]and]N.Z.]
[For]Australia]and]N.Z.]
Entering G- CODE numbers is an easy way of timer recording. You can
find these numbers in TV listings in newspapers and magazines.
1
Press [G-Code].
2
Press the numbered buttons to enter
the G-
CODE number.
Press [ 2] to move back to correct a digit.
3
Press [OK].
≥Confirm the programme (start and end time) by using a TV
magazine, etc. and make corrections if necessary using
[
3, 4, 2, 1] ( ➡ 27, step 3).
≥When “-- ---” appears in the “Name” column, you cannot set
timer recording. Press [ 3, 4] to select desired programme
position. After you have entered the information of a TV
station, it is kept in the unit’s memory.
4
Press [OK].
The timer programme is stored and the timer icon is
displayed.
“ F” lights on the unit’s display to indicate timer recording
standby has been activated.
Repeat steps 1–4 to programme other recordings.
Press [
Í DVD] to turn the unit off.
∫ To cancel recording when recording has already
begun ( ➡ 28)
∫ To release the unit from recording standby
( ➡ 28)
∫ Notes on timer recording ( ➡ 28)
G- CODE is a registered trademark of
Gemstar Development Corporation. The
G-
CODE system is manufactured under
license from Gemstar Development
Corporation.
STATUS F Rec REC MODE REC
MANUAL SKIP AUDIO DISPLAY
CREATE
CHAPTER
FU
NC
TIO
N
M EN
U DI RE
CT
NA
VIG
AT OR
PRO G/CHECK
RETURN
PLAY/x1.3 PAUSE STOP
SLOW/SEARCH SKIP
INPUT SELECT
CH
0
9 8 7
6 5 4
3 2 1
CH
AV
Í
TV
DRIVE
SELECT
Í
DVD
VOL
DELETE G-Code
EXIT TIME SLIP
OK
OPTION
-/--
PROG/CHECK
G-Code
3,4,2,1
OK
DRIVE
SELECT
REC MODE
Í DVD
Numbered
buttons
e.g., [Australia]and]N.Z.]
Using G- CODE system to make timer
recordings
G-Code
Record 1:58 SP DVD 30:24 SP HDD Remain
12:53:00 15. 7. TUE
Input G-Code Number 0-9, and press OK.
G-Code
Record 1:58 SP DVD 30:24 SP HDD Remain
12:53:00 15. 7. TUE
Input G-Code Number 0-9, and press OK.
Timer
Recording
1:58 SP DVD 30:24 SP HDD Remain
12:54:00 15. 7. TUE
Mode Stop Start Name Date
HDD
DVD
20:00 19:00 15. 7. TUE SP HDD 1 ARD
Programme Name
No. Name
ARD 01
&
Timer icon
12:56:00 15. 7. TUE
Mode Stop
HDD
DVD
HDD
Drive
space
SP OK 20:00
Programme
Check to make sure “OK”
is displayed (
➡ 29).
EH57_67GN.book Page 26 Thursday, March 15, 2007 5:36 PM