beautypg.com

Play, Main unit, The unit’s display – Panasonic DMR-EH67 EN User Manual

Page 13

background image

13

RQT8906

1 Standby/on switch (

Í/I) (

➡ 19)

Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.

2 Disc tray (

➡ 22, 30)

3 Connection for digital video (DV) camcorder (

➡ 54)

4 Connection for VCR, camcorder etc. (

➡ 54)

5 Display (

➡ below)

6 Channel select (

➡ 22)

7 Stop (

➡ 22, 31)

8 Start play (

➡ 30)

9 Start recording (

➡ 22)/Specify a time to stop recording (➡ 24)

: Open/close disc tray (

➡ 22, 30)

; Remote control signal sensor

< [EH67] SD Card slot (

➡ below)

Rear panel terminals (

➡ 14–17)

When the card indicator (“SD”) on the unit’s display is flashing, the card is being read from or written to. Do not turn off the unit or remove the card.
Such action may result in malfunction or loss of the card’s contents.
Inserting foreign objects can cause a malfunction.
≥You can use SD Cards with capacities from 8 MB to 4 GB (

➡ 7).

Automatic drive select function
≥If you insert an SD Card while the unit is stopped, the “SD Card” screen is displayed. Select an item and press [OK] to switch to the SD drive

(

➡ 36, 52).

If you remove an SD Card, the HDD drive is automatically selected.

3 Timer recording indicator
4 [EH67] SD Card slot indicator
5 Disc indicator

Lights when a disc that is supported by this unit is inserted in the
tray.

6 Drive [HDD, DVD or SD ([EH67])] indicator

Lights when the HDD, DVD or SD drive is selected.

7 Main display section indicator
8 Recording mode indicator

Main unit

REC

OPEN/CLOSE

REC

1

2

4

5

6 7 8

9 :

;

<

3

[EH67]

Opening the front panel

Place your finger on the protruding section below the

4 and

press down to flip open the front panel.

Inserting, Removing the SD Card

[EH67]

Inserting the card

Removing the card

The unit’s display

ADAPTER

If you are using a
miniSD card, insert it
into the miniSD card
adaptor that comes
with the card.
Insert and remove this
adaptor from the unit.

Press on the centre of the
card until it clicks into
place.

Insert the card label up with
the cut-off corner on the right.

1

2

Press on the centre of
the card.

Pull it straight out.

PLAY

PLAY

PLAY

REC

REC

REC

1

2

4

3

8

5

6

[EH67]

7

2

1 Copying indicator

Lights during copy.

Recording
indicator

Playback
indicator

Recording/
Playback indicator

Playback
indicator

Contr

o

l r

e

fe

re

nc

e

guide

EH57_67GN.book Page 13 Thursday, March 15, 2007 5:36 PM