Paradyne 6212-A2 - Manual (Page 41)

6212-A2 and 6382-A1 ADSL Router User’s Guide
Figure 21 (Ping test)
4.7.6 Modem Test
The Modem Test is used to check whether your Modem is properly connected to the WAN Network. This test may
take a few seconds to complete. To perform the test, select your connection from the list and press the Test button.
Before running this test, make sure you have a valid DSL link; if the DSL link is not connected, this test will always
fail.
The DSLAM must support this feature; not all DSLAMs have F4 and F5 support.
4.8 Status
The Status section allows you to view the status and statistics of different connections and interfaces.
4.8.1 Network Statistics
Select to view the Statistics of different interfaces (Ethernet and DSL).
4.8.2 Connection Status
Select to view the Status of different connections.
4.8.3 DHCP Clients
Select to view the list of DHCP clients.
41