Philips BDP5150/F7 - Manual (Page 39)

39
LIST OF SETTINGS
EN
EN
Category Menus / Options Description
Advanced Setup
Audio Night Mode Auto Compresses the range between soft
and loud sounds.
“Auto”:
Night Mode will be activated
automatically when Dolby TrueHD
audio is played back.
“On”:
Activates the Night Mode.
“Off”:
Deactivates the Night Mode.
On
Off
Down Sampling On Sets the sampling rate for outputting
the PCM audio from the digital output
(coaxial).
“On”:
Over 96 kHz PCM audio will be down
sampled at 48 kHz.
“Off”:
For BD or DVD recorded in LPCM
without copyright protection,
2-channel audio signals up to 96 kHz
are output as LPCM signals.
Off
Virtual Surround On Select “On” to enjoy the stereophonic
virtual space through your existing 2
channel stereo system during
playback of BD-video or DVD-video.
Off
Blu-ray Disc Audio Mix Audio Output “Mix Audio Output”:
The audio for the secondary video and
the interactive application will be
output together with the audio for the
primary video.
“Primary Audio Only”:
Only the audio for the primary video
will be output.
When playing back a BD-video which
only contains the primary audio, the
audio output will be the same case as
the “Primary Audio Only” even if the
“Blu-ray Disc Audio” is set to “Mix
Audio Output”.
Primary Audio Only
HDMI Audio
• This feature is
available only when
the display device is
connected by an
HDMI cable.
• Refer to page 44 for
more information.
HDMI Normal Sets the audio format for the sound
output from the HDMI OUT jack.
PCM
Off
Digital Out
• When HDMI cable is
connected, make
sure “HDMI Audio”
setting is set to “Off”
to change the
“Digital Out”
setting.
• Refer to page 46 for
more information.
Bitstream Sets the audio format for the sound
output from the DIGITAL OUT
(COAXIAL) jack.
PCM
Int
rod
uct
ion
Co
nn
ect
ions
Ba
si
c S
e
tup
P
la
yba
c
k
O
thers
Fu
nct
ion
S
e
tup