Paradyne 6218-I1 - Manual (Page 63)

5. Advanced Setup
6218-A2-GB23-00 September 2005 5-23
Capability
The following are included under Capability:
„ Bitswap Enable
„ SRA (Seamless Rate Adaptation) Enable
Do not change these settings unless so directed by your ISP.
DSL Advanced Settings
Do not change the DSL Advanced Settings unless so directed by your ISP. To view
the DSL Advanced Settings screen, click on the Advanced Settings button on the
DSL Settings screen (see
Figure 5-35 ).
Figure 5-36. DSL Advanced Settings
There are five test modes between the router and your ISP:
„ Normal test: Puts the router in a test mode in which it only sends a Normal
signal.
„ Reverb test: Puts the router in a test mode in which it only sends a Reverb
signal.
„ Medley test: Puts the router in a test mode in which it only sends a Medley
signal.