Philips PI7000/93 - Manual (Page 9)

10 EN
3 Get started
Charge power
Pi7000 has a built-in battery that can be
charged through the USB connector of the
supplied USB power adapter.
7KH ÀUVW WLPH \RX XVH Pi7000, charge Pi7000
for more than eight hours.
‡ By using the USB cable, connect
Pi7000 to the supplied USB power
adapter.
Note
‡ Rechargeable batteries have a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
‡ When the battery is fully charged, is displayed.
To conserve battery power and increase the
play time, do the following on the device:
‡ Switch off the functions when they are
unnecessary, such as Wi-Fi, Bluetooth,
and the sync option for Background
data (see 'Accounts 41).
‡ Set the screen-off timer to a low value
(go to
> Screen > Timeout).
Switch the device on or off
Press and hold the power/ lock button until the
device is switched on or off.