Panasonic CQ-C5403U - Manual (Page 10)

10
9
E
N
G
L
I
S
H
CQ-C5403U/C5303U
General
[SQ] (Sound Quality)
[D] (DISP) (Display)
[MUTE] (Mute/attenuation)
[SRC/PWR] (Source/Power)
Remote control sensor ( a Page 8)
[VOLUME]
Spectrum analyzer ( a Page 26)
SQ3 indicator
Power
Set your car's ignition switch to the ACC or ON position.
ON : Press [SRC/PWR].
OFF : Press and hold [SRC/PWR] until you hear a
beep (approximately 1 second), then release it.
Note:
¡
When the ignition switch is set to ON, the face plate is
tilted to secure their former positions.
¡ If you turn the key to the ACC OFF position during the
security function is active, the security message
appears with a warning alarm. (Default: SLED ON)
(
a Page 28 about Security Function setting)
Volume
Note:
¡
The volume level can be set independently for each
source. (For radio, one volume setting for AM, one vol-
ume setting for all FMs)
Mute/Attenuation
ON : Press [MUTE].
OFF : Press [MUTE] again.
You can select mute or attenuation. (
a Page 26)
indicator
Up Down
CD Player mode display ( a Page 17)
Preset Buttons [1] to [6]
Default: 18
Setting range: 0 to 40