Philips FW585C - Manual (Page 25)

25
English
To switch off the TIMER
1 Press CLOCK/TIMER for more than two
seconds.
2 PressÇ on the system to cancel the
timer.
™ The timer is now switched off.
™ The display will show "OFF" and the
TIMER flag disappears.
To start the TIMER again (for the same
preset time and source)
1 Press CLOCK/TIMER for more than two
seconds.
2 Press CLOCK/TIMER again to store the
start time.
™ The timer is now switched on.
™ The
TIMER flag appears on the display.
TIMER SLEEP TIMER MAINTENANCE
Sleep Timer (only on remote control)
This feature allows you to select a length
of time after which the system will switch
to the standby mode automatically.
• Press SLEEP TIMER on the remote
control repeatedly to select a period of
time.
™ The selections are as follows (time in
minutes):
60 ™ 45 ™ 30 ™ 15 ™ OFF ™
60 …
™ “SLEEP XX” or “OFF” will be
displayed. " XX" is the time in
minutes.
• When you reach the desired length of
time, stop pressing the SLEEP TIMER
button.
™ After this amount of time passes, the
system will switch to the standby
mode.
To switch off the sleep timer
• Press SLEEP TIMER repeatedly until
" OFF" is displayed, or press the
STANDBY ON button.
Maintenance
Cleaning the Cabinet
• Use a soft cloth slightly moistened
with a mild detergent solution. Do not
use a solution containing alcohol,
spirits, ammonia or abrasives.
Cleaning Discs
• When a disc becomes
dirty, clean it with a
cleaning cloth. Wipe
the disc from the center
out.
• Do not use solvents
such as benzine, thinner, commercially
available cleaners, or antistatic spray
intended for analog records.
Cleaning the CD lens
• After prolonged use, dirt or dust may
accumulate at the CD lens. To ensure
good playback quality, clean the CD
lens with Philips Magnavox CD Lens
Cleaner or any commercially available
cleaner. Follow the instructions
supplied with cleaner.
Cleaning the Heads and the Tape
Paths
• To ensure good recording and playback
quality, clean the heads, the
capstan(s), and pressure roller(s) after
every 50 hours of tape operation.
• Use a cotton swab slightly moistened
with cleaning fluid or alcohol.
• You can also clean the heads by playing
a cleaning tape once.
Demagnetizing the heads
• Use a demagnetizing tape available at
your dealer.