Philips FW585C - Manual (Page 21)

21
English
Selecting External Equipment
If you have connected the audio out
terminals of the external equipment (TV,
VCR, Laser Disc player, DVD player, or CD
Recorder) to the AUX/CDR IN terminals,
you can hear the enhanced sound from the
system.
• Press AUX to select AUX-CDR mode.
™ "CDR" will be displayed.
• Press AUX again to select the external
mode.
™ "AUX" will be displayed.
Notes:
– There are two AUX modes:
i. the normal AUX mode.
ii. the CDR mode; where the LINE OUT
of this mini system is muted. You will
not be able to record or listen to the
sound from the LINE OUT.
– You are advised not to listen to and
record from the same source
simultaneously.
– All the sound control features (e.g. DSC,
DBB, etc.) are available for selection.
TAPE AUX/CDR
REC
SHUFFLE
TIMER
STEREO
FM
BACK HSD REPEAT
PROGRAM
LW MW AM T.A. NEWS FRONT
60Hz 500Hz 250Hz 1KHz 2KHz 4KHz 8KHz
TAPE CD
OG SIDE A•B
TUNER AUX
PRESET ▲ ▲
STOP•CLEAR SEARCH • TUNING PLAY PAUSE PREV NEXT
C D 1 • 2 • 3 CDR TAPE 1 • 2 FM • AM
A. REV
During playback
• Press and hold à or á until the
desired passage is located.
™ During searching, the sound is
reduced to a low volume.
™ When you release à or á, the
tape continues playing.
Notes:
– During rewinding or fast forwarding of a
tape, it is also possible to select another
source (e.g. CD, TUNER, or AUX).
– Before use, check and tighten slack tape
with a pencil. Slack tape may get
jammed or may burst in the mechanism.
– C-120 tape is extremely thin and is
easily deformed or damaged. It is not
recommended for use in this system.
– Store the tapes at room temperature
and do not put them too close to a
magnetic field (for example, a
transformer, TV, or speaker).
.