Panasonic DMR-EX79 - Manual (Page 25)

25
RQT9306
Ad
van
ced
o
p
erati
o
n
s
≥Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
Press [PROG/CHECK].
A Icons
B Message displayed in the “Drive space” line
C Channel name, programme name and other
information are displayed.
∫ To change a programme
Press [3, 4] to select the programme and press [OK]. (> 23,
right column, step 3)
∫ To delete a programme
Press [3, 4] to select the programme and press [DELETE ¢].
You can also delete a programme with the following steps
1
Press [3, 4] to select the programme and press [OPTION].
2 Press [3, 4] to select “Delete” and press [OK].
∫ To exit the timer recording list
Press [PROG/CHECK].
≥Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
≥A disc with different TV system may not be played with the setting
as is, only when recording or on standby for the timer recording.
In this case, you will be able to playback by changing the “TV
System” settings. But to prevent the failure of the timer recording,
change back the settings before the recording starts. (> 63)
≥Timer recordings are activated regardless of whether the unit is
turned on/off.
≥Timer recordings begin when the set time is reached even when
playing.
≥Timer recordings do not begin while editing or copying in normal
speed mode (> 45).
≥If the unit is turned on when timer recording begins, it remains
turned on after recording finishes. It does not turn off automatically.
You can turn the unit off during timer recording.
≥When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part at
the beginning of the later programmes.
Check, change or delete a programme
F Timer recording standby is activated.
[ This programme is currently recording.
Programmes are overlapped. Recording of the programme
with the later start time starts when the earlier programme
finishes recording.
You stopped a daily or weekly timer recording. The icon
disappears the next time the timer programme starts
recording.
The disc was full so the programme failed to record.
The programme was copy-protected so it was not recorded.
X The programme did not complete recording because the disc
is dirty or some other reason.
Timer programmes set to Auto Renewal Recording (> 24).
Titles that have been rerouted to the HDD
(Displayed while recording.)
HDD Recording drive is set to HDD
DVD Recording drive is set to DVD
OK: Displayed if the recording can fit in the remaining
space.
> (Date): For recordings made daily or weekly, the display will
show until when recordings can be made (up to a
maximum of one month from the present time) based
on the time remaining on the disc.
! : It may not be possible to record because:
≥there is not enough space left.
≥the number of possible titles has reached its
maximum.
≥programmes are overlapped.
≥you stopped a daily or weekly timer recording.
Relief: Timer programmes that will be relief recorded to the
HDD.
Timer
Recording
1:58 SP DVD 30:24 SP HDD Remain
RETURN
OK
Press OK to store new programme.
Mode Stop Start No. Date
HDD
DVD
Channel
Drive
space
New Timer Programme
TUE 14.10.09. 12:54:00
Note
Notes on timer recording
Programme Programme
Recorded Recorded
Not recorded
DMREX79GN-RQT9306-L_eng.book 25 ページ ２００９年３月２４日 火曜日 午後２時３８分