Panasonic DMR-EX79 - Manual (Page 23)

23
RQT9306
Ad
van
ced
o
p
erati
o
n
s
Advanced timer recording
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
≥You can enter up to 32 programmes up to a month in advance.
(Each daily or weekly programme is counted as one programme.)
[RAM] [-RW‹V›] [+R] [+RW]
≥To use a new disc, formatting is necessary.
Preparation
≥Turn on the television and select the appropriate video input to
suit the connections to this unit.
≥If recording to DVD, insert a disc that you can use for recording
(> 10, 13).
≥Make sure that the clock settings are correct (> 64).
Entering G- CODE numbers is an easy way of timer recording. You
can find these numbers in TV listings in newspapers or magazines.
The G- CODE system is not supported for digital broadcasts.
1
Press [G-Code].
2
Press the numbered buttons to enter
the G-
CODE
number.
Press [2] to move back to correct a digit.
3
Press [OK].
≥Confirm the programme (start and end time) by using a TV
magazine, etc. and make corrections if necessary using
[3, 4, 2, 1] (> right column, step 3).
≥When “-- ---” appears in the “Channel” column, you cannot
set timer recording. Press [3, 4] to select desired
programme position. After you have entered the information
of a TV station, it is kept in the unit’s memory.
4
Press [OK].
The timer programme is stored and the timer icon is
displayed.
“ F” lights on the unit’s display to indicate timer recording
standby has been activated.
Repeat steps 1–4 to programme other recordings.
Press [Í] to turn the unit off.
1
Press [PROG/CHECK].
2
Press [3, 4] to select “New Timer
Programme” and press [OK].
3
Press [1] to move through the items
and change the items with [3, 4].
≥When “Channel” is selected, you can press the “Blue” button
to change the category [e.g., Free TV, Radio, Favourite
(> 59)] and then press [3, 4] to select the channel you
want to record.
≥Press and hold [3, 4] to alter the Start (Start time) and Stop
(Finish time) in 30-minute increments.
≥You can also set Channel (Programme position/TV Station
Name), Date, Start (Start time), and Stop (Finish time) with
the numbered buttons.
≥Date
Titles recorded using the same daily or weekly timer are
bundled and displayed as a “group” in the
DIRECT NAVIGATOR screen (> 29) except when using
Auto Renewal Recording.
≥You can also press [DRIVE SELECT] to select the recording
drive.
When the recording drive is “DVD” and there is not enough
remaining space, recording automatically switches to the
“HDD” (> 24, Relief Recording).
≥You can also press [REC MODE] to change the recording
mode.
≥[HDD] RENEW (Auto Renewal Recording) (> 24)
ON !)OFF
≥Programme Name
Press [2, 1] to select “Programme Name” and press [OK].
(> 44, Entering text)
4
Press [OK].
The timer programme is stored and the timer icon is
displayed.
“ F” lights on the unit’s display to indicate timer recording
standby has been activated.
Repeat steps 2–4 to programme other recordings.
Press [Í] to turn the unit off.
Using G- CODE system to make timer
recordings (Analogue broadcast only)
G-code is a registered trademark of
Gemstar Development Corporation. The
G-
CODE system is manufactured under
license from Gemstar Development
Corporation.
Note
Input G-Code Number 0-9, and press OK.
G-Code
Record
1:58 SP DVD 30:24 SP HDD Remain
TUE 14.10.09. 12:53:00
Timer
Recording
1:58 SP DVD 30:24 SP HDD Remain
Mode Stop Start Channel Date
HDD
DVD
17:00 16:00 15. 7. TUE SP HDD 1 ARD
Programme Name
All Channels : ARD
TUE 14.10.09. 12:53:00
No. Channel
ARD 01

Timer icon
Mode Stop
HDD
DVD Drive
space
rogramme
HDD SP OK 17:00
TUE 14.10.09. 12:56:00
Check to make sure “OK” is
displayed (> 25).
Manually programming timer
recordings
[.
l
l
l
l
a.
Date: Current date up to one month later minus
one day ;:
Daily timer:
SUN-SAT >MON-SAT>MON-FRI
;:
Weekly timer: SUN
>--->SAT
Timer
Recording
1:58 SP DVD 30:24 SP HDD Remain
Mode Stop Start No. Date
HDD
DVD
Channel Drive space
New Timer Programme
TUE 14.10.09. 12:54:00
Timer
Recording
1:58 SP DVD 30:24 SP HDD Remain
Mode Stop Start Channel Date
HDD
DVD
22:30 22:00 15. 7. TUE HDD 1 ARD
Programme Name
SP
All Channels : ARD
TUE 14.10.09. 12:54:00
No. Channel
ARD 01

Timer icon
Mode Stop
HDD
DVD Drive
space
ogramme
HDD SP OK 22:30
TUE 14.10.09. 12:56:00
Check to make sure “OK” is
displayed (> 25).
DMREX79GN-RQT9306-L_eng.book 23 ページ ２００９年３月２４日 火曜日 午後２時３８分