Polaris FS IQ TOURING 7427 C - Manual (Page 36)

33
FEATURES
Passenger Grab Handle
On some models the position of the
passenger grab handles can be
adjusted for rider preference.
1. Unscrew and remove the knob
assemblies that secure the grab
handles.
2. Reposition the grab handles to
one of the three available posi-
tions on the grab handle tube
between the operator seat and the
passenger seat.
3. Reinstall the knob assemblies and
tighten securely.
12-Volt DC Outlet
If equipped, use the outlet to power
a global positioning sensor (GPS),
heated helmet shield, utility light,
cell phone or other accessories.
The 12-volt DC outlet is installed
in the recoil pocket next to the
right hood hold-down. If you
install an accessory outlet on your
model, always install it in the
recoil pocket. The fuel filter is
installed in the upper console area.
Do not install an outlet on the
upper console.
WARNING
Serious injury could occur if sparks ignite a fuel supply. Do not install an
accessory 12-volt DC outlet on the upper console. Install the outlet in the
recoil pocket.
Knob
Assembly
12-Volt DC Outlet