Panasonic PV-D734S - Manual (Page 23)

23
2
To ADD/DELETE channels / Weak signal display
To ADD/DELETE channels
You can add the channels you want or delete the channels
you do not want manually.
Repeat the step 1 on page 22.
Then press SET + or – to select
the “ADD/DELETE” option and
press ENTER.
Press Number keys or SET +
or – to select a channel
number you want to add or
delete.
1
To Add or Delete desired channels
1
To add channels
Press ENTER until “ADD”
appears on the screen to set
to add the unmemorized
channel.
To delete channels
Press ENTER until “DELETE” appears on the screen to
set to delete the channel from memory. The channel
number will blink.
Repeat and to add or delete other channel. 1
2
3 2
3
Press VCR MENU until the menu screen is cleared.
Repeat the steps 1~2 on page 21 and press SET + or – to
select “WEAK SIGNAL DISPLAY” option.
1
2 Press ENTER to select the “ON”
position.
Weak signal display
When you don't want to receive a weak signal broadcast, the
Blue back screen can be obtained by selecting the “WEAK
SIGNAL DISPLAY” option “ON”. When the unit is shipped
from the factory, the “WEAK SIGNAL DISPLAY” option is set
to the “OFF”.
3 Press VCR MENU until the menu screen is cleared.
〈 +/-/ENTER/MENU 〉
CH SETUP
TV CATV
AUTO CH MEMORY
ADD/DELETE
〈 +/-/0-9/ENTER/MENU 〉
ADD CH 003
á +/-/ENTER/MENU ñ
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
WEAK SIGNAL DISPLAY
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
ON OFF
ON OFF
Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the VCR mode. (The VCR indicator
will light.)
2C51801A (22-27) 19/08/2003, 10:37 23