Panasonic KX-FC228HK User Manual
Page 44
7. Answering Machine
44
*1 If pressed within the first 5 seconds of a message,
the previous message will be played.
*2 To resume operation, press a command key within
10 seconds.
Recording a marker message
After playing back the messages, you can leave an
additional message.
1. Wait for 3 beeps indicating the end of the remote
operation.
2. Wait about 10 seconds.
3. Hear the voice guide and/or hear 1 beep.
4. Leave a message.
To turn ON the auto answer setting
1. Call your unit and let it ring 15 rings.
L
A beep will sound.
2. Enter the remote operation ID (page 43, feature #11
on page 46) within 10 seconds.
L
The receiving mode will be set to TAM/FAX or
FAX ONLY mode, depending on the setting of
feature #77 (page 50).
3. Hang up the handset.
Note:
L
You cannot turn ON the auto answer setting when the
unit is set to TEL/FAX mode.
Key
Remote command
{
1}
Repeats a message (during
playback)
{
2}
Skips a message (during playback)
{
4}
Plays new messages
{
5}
Plays all messages
{
6}
Plays greeting message
{
7}
Records greeting message
{
9}
Stops current operation
{
0}
Turns OFF auto answer setting
{*}{
4}
Erases a specific message (during
playback)
{*}{
5}
Erases all messages
{*}{
6}
Erases greeting message (during
greeting message playback)
{*}{#}
Ends remote operation
{#}
Skips the greeting message
FC228HK-PFQX2656ZA-en.book Page 44 Thursday, August 31, 2006 11:35 AM