Panasonic KX-FP215 - Manual (Page 41)

8. Programmable Features
41
Setting flash time {#}{ 7}{2} The flash time depends on your telephone exchange or host PBX.
{
1} “ 700ms” (default)
{ 2} “ 600ms”
{ 3} “ 400ms”
{ 4} “ 300ms”
{ 5} “ 250ms”
{ 6} “ 110ms”
{ 7} “ 100ms”
{ 8} “ 90ms”
Note:
L If the unit is connected via a PBX, this setting may need to be
changed in order for PBX functions (transferring a call, etc.) to
work correctly. Consult your PBX supplier for the correct
setting.
Setting the Caller ID
number auto edit
feature {#}{ 7}{5} { 0} “ OFF”
{ 1} “ ON” (default)
See page 21 for details.
Setting the connecting
tone {#}{ 7}{6} If you often have trouble when sending faxes, this feature allows
you to hear connecting tones: fax tone, ring back tone and busy
tone. You can use those tones to confirm the status of the other
party’s machine.
{
0} “ OFF”: Deactivates this feature.
{ 1} “ ON” (default): You will hear connecting tones.
Note:
L If the ring back tone continues, the other party’s machine may
not be a fax machine or may have run out of paper. Check with
the other party.
L The connecting tone volume cannot be adjusted.
Changing the receiving
mode in the AUTO
ANSWER setting {#}{ 7}{7} { 1} “ TAM/FAX” (default): Telephone Answering Machine/Fax
mode (page 28)
{
2} “ FAX ONLY”: Fax only mode (page 27)
Resetting advanced
features to their default
settings {#}{ 8}{0} { 0} “ NO” (default)
{ 1} “ YES”
To reset the advanced features:
1. {MENU} i {#}{8}{0}
2. Press {1} to select “ YES”. i {SET} i {SET} i
{ MENU}
Note:
L The ECM setting (feature #68 on page 40) will not be reset.
Feature Feature code Selection
FP215-PNQX1896ZA-OI-en.book Page 41 Tuesday, December 23, 2008 11:09 AM