Volume, 4 adjusting volume, Initial programming – Panasonic KX-FP215 User Manual
Page 16: 5 date and time, Adjusting volume, Date and time, 4 adjusting volume, 5 date and time

2. Preparation
16
For assistance, please visit http://www.panasonic.com/help
Volume
2.4 Adjusting volume
Ringer volume
While the unit is idle, press {A} or {B}.
L
If there are any documents in the document
entrance, you cannot adjust the volume. Confirm that
there are no documents in the entrance.
To turn the ringer OFF
Press {B} repeatedly to display “
RINGER OFF= OK?”.
i {SET}
L
The unit will not ring.
L
To turn the ringer back ON, press {A}.
Ringer tone
L
You can select the ringer tone from one of 3 patterns
(feature #17 on page 37).
Handset receiver volume
While using the handset, press {A} or {B}.
Speaker volume
While using the speakerphone, press {A} or {B}.
Initial Programming
2.5 Date and time
1
{
MENU} i {#}{0}{1} i {SET}
M:
|
01/D:01/Y:09
TIME: 12:00AM
2
Enter the current month/date/year/hour/minute by
selecting 2 digits for each.
Example: August 10, 2009 10:15 PM (12 hour
clock format)
1. Press {0}{8} {1}{0} {0}{9} {1}{0} {1}{5}.
M:
|
08/D:10/Y:09
TIME: 10:15AM
2. Press {*} repeatedly to select “
PM”.
3
{
SET}
4
Press {MENU} to exit.
Note:
L
The other party’s fax machine will print the date and
time on the top of each page you send according to
your unit’s date and time setting.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
If you have subscribed to a Caller ID service
The date and time will be automatically set according to
the received caller information.
L
If the time has not previously been set, Caller ID will
not adjust the clock.
L
You can turn this feature OFF (feature #33 on page
39).
{
SET}
{A}{B}
{
SET}
{
MENU}
{<}{>}
FP215-PNQX1896ZA-OI-en.book Page 16 Tuesday, December 23, 2008 11:09 AM