Planar PL1520M - Manual (Page 23)

20
OPERATING INSTRUCTIONS (cont.)
Video Picture Setting
When the input source is in Video or S-Video mode, there are four pictures
modes to select: Custom, Standard, Soft & Vivid. Only Custom mode allows
you to adjust Brightness, Contrast, Hue, Saturation and Sharpness.
VIDEO Picture Setting (Composite video/ S-Video mode)
1. Press “ MENU” key to open OSD menu
2. Press>or 3. Press “MENU” key to Select submenu
·
Brightness
1. Press>or 2. Press “MENU” key to Select submenu
3. Press>or 4. After adjustment, press “AUTO” key to exit.
·
Contrast
1. Press>or 2. Press “MENU” key to Select submenu
3. Press>or 4. After adjustment, press “AUTO” key to exit.
·
HUE (only works for NTSC systems)
1. Press>or 2. Press “MENU” key to Select submenu
3. Press>or 4. After adjustment, press “AUTO” key to exit.