beautypg.com

Setting the video of rear display, Switching the dimmer setting for sub, Display – Pioneer SUPERTUNERIIID+ AVH-P7850DVD User Manual

Page 97: Adjusting the contrast for the sub, Changing languages for caution, Switching the dimmer setting for sub-display, Adjusting the contrast for the sub-display, Setup

background image

Setting the video of rear
display

You can select either showing the same
source as the front display or showing the
video source on rear display independently.

! When selecting FRONT and the selected

source is an audio source, nothing is dis-
played on the rear display.

! When selecting FRONT, audio is not out-

putted from

REAR DISPLAY OUT.

% Touch REAR MODE on the setup menu
to select the video on rear display.
Each time you touch

REAR MODE it switches

between the following settings:

! FRONT – Display the same source as the

front display

! SEPARATE – Display the video source on

rear display independently of front dis-
play

Switching the dimmer
setting for sub-display

To prevent the sub-display from being too
bright at night, the sub-display is automati-
cally dimmed when the car

’s headlights are

turned on. You can turn dimmer on or off.

% Touch SUB DISPLAY DIMMER on the
setup menu to turn dimmer on.

# To turn dimmer off, touch
SUB DISPLAY DIMMER again.

Adjusting the contrast for
the sub-display

Display contrast adjustment lets you adjust
the display for easier viewing when lighting
conditions change.

% Press SUB DISPLAY CONTRAST on the
setup menu to switch the contrast setting.
Each time you touch
SUB DISPLAY CONTRAST it switches between
HIGH (high contrast) and LOW (low contras-
t).

Changing languages for
CAUTION

Some operations on this unit are prohibited
while driving or needs to be paid a careful at-
tention when operating. In such case, a cau-
tion appears on the display. You can change
the language of the cautions at this setting.

1

Touch CAUTION LANGUAGE on the

setup menu.

2

Touch the desired language.

The language for CAUTION is set.

Setup

En

97

Section

18

Setup